How to set up Belong 4353 Modem for nbn FTTP
You'll need to plug in your modem and change some settings to get it working with TPG nbn FTTP.
-
First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
-
Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.
-
Use the Ethernet cable to connect your modem's red WAN port to your NCB's UNI-D1 port.
The message from us will tell you if you need to use a different UNI-D port.
-
Use the power cable to connect the Power port on your modem to a power outlet. Press your modem's Power button to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s yellow LAN ports.
-
Open your web browser and go to: https://10.0.0.138 or https://mygateway
-
Log in with the default username "admin" and the default password "Belong" found on your modem's barcode sticker. If you have custom login details, use those instead.
-
Select Broadband.
-
Delete the existing username and password under PPP Settings.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Apply.
-
Wait 2 minutes and then refresh your web page. You should now be good to go with a green icon for “Internet: Connected”.
Can't get online? Call us on 1300 997 271 and we'll help you.