How to set up ASUS RT-AC1200 for nbn FTTC
You'll need to plug in your modem and change some settings to get it working with TPG nbn FTTC.
- First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
- Find your phone wall socket and nbn Connection Device (NCD) – you probably already have a modem plugged in from your last internet service. Unplug any old modem from the NCD and power outlet.
If your NCD is missing, please call us on 1300 023 575. -
Use the Ethernet cable to connect your modem’s blue WAN port to your NCD's yellow Gateway port.
-
Use the power cable to connect the Power port on your modem to a power outlet. Use the modem's Power switch to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s other yellow Ethernet ports.
-
Open your web browser and go to: https://192.168.1.1 or https://www.router.asus.com
-
Log in with the default username "admin" and default password "admin" on your modem's barcode sticker. If you have custom login details, use those instead.
-
If you see the QIS page, hit Skip Setup Wizard.
-
Select Advanced Settings > WAN.
-
Hit the Internet Connection tab.
-
Set WAN Connection Type to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Apply and you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.