How to set up D-Link DIR-1960 for nbn FTTC
You'll need to plug in your D-Link DIR-1960 Exo AC1900 Smart Mesh Wi-Fi Router and change some settings to get it working with TPG nbn FTTC.
- First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
- Find your phone wall socket and nbn Connection Device (NCD) – you probably already have a modem plugged in from your last internet service. Unplug any old modem from the NCD and power outlet.
If your NCD is missing, please call us on 1300 023 575. -
Use the Ethernet cable to connect your modem’s yellow Internet port to your NCD's yellow Gateway port.
-
Use the power cable to connect the Power port on your modem to a power outlet. Press the modem's Power button to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s LAN ports.
-
Open your web browser and go to: https://192.168.1.1 or https://dlinkrouter.local
-
Log in with the default password found on your modem's barcode sticker. If you have a custom password, use that instead.
-
Select Settings, then Internet.
-
Set My Internet Connection is to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
If you have a bundled nbn & phone plan: Go to Internet Settings > VLAN. Enable Triple Play Status and Priority ID. For Internet VLAN ID, enter 2 and for Priority ID, enter 0.
-
Hit Save and you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.