How to set up TP-Link Archer VR900 for nbn Wireless
You'll need to plug in your modem and change some settings to get it working with TPG nbn Wireless.
-
First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
-
Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.
-
Use the Ethernet cable to connect your modem's yellow LAN/WAN port to your NCB's UNI-D1 port.
The message from us will tell you if you need to use a different UNI-D port.
-
Use the power cable to connect your modem's Power port to a power outlet. Press the Power button on the side of your modem to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 3 devices to your modem’s yellow LAN ports.
-
Open your web browser and go to: https://192.168.0.1 or https://tplinkmodem.net
-
Log in with the default username "admin" and the default password "admin" on your modem's barcode sticker. If you have custom login details, use those instead.
-
Select Advanced > Operation Mode.
-
Hit Wireless Router Mode.
-
Hit Save and wait for your modem to reboot.
-
Select Basic > Internet.
-
For ISP, choose Other.
-
If you have a bundled nbn & phone plan: Tick the Enable box for VLAN ID and enter 2.
-
Set Internet Connection Type to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Save and you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.