How to set up TP-Link Archer VR400 for nbn FTTP
You'll need to plug in your modem and change some settings to get it working with TPG nbn FTTP.
-
First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
-
Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.
-
Use the Ethernet cable to connect your modem's yellow LAN/WAN port to your NCB's UNI-D1 port.
The message from us will tell you if you need to use a different UNI-D port.
-
Use the power cable to connect your modem's Power port to a power outlet. Press your modem's Power button to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s Ethernet ports.
-
Open your web browser and go to: https://192.168.1.1 or https://tplinkmodem.net
-
Log in with the default username "admin" and default password "admin" on your modem's barcode sticker. If you have custom login details, use those instead.
You may be prompted to change your password when you first log in. -
Select Advanced > Operation Mode, then Wireless Router Mode.
-
Hit Save, then wait for your modem to reboot.
-
Select Basic, then Internet.
-
For ISP, choose Other.
-
Set Internet Connection Type to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Save and you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.