How to set up Netgear Orbi RBK50 for nbn Wireless
You'll need to plug in your modem and change some settings to get it working with TPG nbn Wireless.
-
Make sure your Orbi is running the latest firmware from Netgear.
-
First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
-
Find your nbn Connection Box (NCB) – this will be connected to the wall socket for your nbn Wireless antenna. You probably already have a modem plugged in from your last internet service. Unplug any old modem from the NCB and power outlet.
-
Use the Ethernet cable to connect your modem's yellow Internet port to your NCB's UNI-D1 port.
-
Use the power cable to connect your modem's Power port to a power outlet. Press your modem's Power button to turn it on.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s yellow LAN ports.
-
Open your web browser and go to: https://192.168.0.1 https://www.routerlogin.net
-
Log in with the default username "admin" and the default password "password" on your modem's barcode sticker. If you have custom login details, use those instead.
- Hit Advanced.
-
Select Setup > Internet Setup.
-
For Does your Internet connection require a login?, hit Yes.
-
Set Internet Service Provider to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Apply.
-
If you have a bundled nbn & phone plan: Select Advanced Setup > VLAN/Bridge Settings and turn on VLAN/Bridge group. Select By VLAN tag group and set VLAN ID to 2. Set Priority to 0.
- Hit Apply and you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.