How to set up D-Link DIR-1960 for nbn FTTP

You'll need to plug in your D-Link DIR-1960 Exo AC1900 Smart Mesh Wi-Fi Router and change some settings to get it working with TPG nbn FTTP.

1. First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.

2. Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.

3. Use the Ethernet cable to connect your modem's yellow Internet port to your NCB's UNI-D1 port.
   The message from us will tell you if you need to use a different UNI-D port.

   

4. Use the power cable to connect the Power port on your modem to a power outlet. Press your modem's Power button to turn it on.

   
5. To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
6. If you have an Ethernet cable, you can connect a device to your modem’s Ethernet port.
   

7. Open your web browser and go to: https://192.168.1.1 or https://dlinkrouter.local

8. Log in with the default password found on your modem's barcode sticker. If you have a custom password, use that instead.

9. Hit Settings, then Internet

10. Set My Internet Connection is to PPPoE.

11. Enter your TPG username and password.
    Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password,  reset your password.

12. Hit Save and you're good to go.
    Can't get online? Call us on 1300 997 271 and we'll help you.