How to set up ASUS RT-AC1500UHP for nbn FTTP
You'll need to plug in your modem and change some settings to get it working with TPG nbn FTTP.
-
First, make sure you’ve got a message from us asking you to plug in your nbn modem. We need to get your connection ready on our side before you plug in.
-
Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.
-
Use the Ethernet cable to connect your modem's blue WAN port to your NCB's UNI-D1 port.
The message from us will tell you if you need to use a different UNI-D port.
-
Use the power cable to connect the Power port on your modem to a power outlet. Turn on your modem's Power switch.
- To connect devices to the WiFi, you'll find the default WiFi name and password on your modem's barcode sticker.
- If you have extra Ethernet cables, you can connect up to 4 devices to your modem’s yellow LAN ports.
-
Open your web browser and go to: https://192.168.1.1 or http://www.router.asus.com
-
Log in with the default username "admin" and the default password "admin" found on your modem's barcode sticker. If you have custom login details, use those instead.
-
If you see the QIS page, hit Skip Setup Wizard.
-
Select Advanced Settings > WAN.
-
Hit the Internet Connection tab.
-
Set WAN Connection Type to PPPoE.
-
Enter your TPG username and password.
Your TPG username can be found in emails from us about your TPG order. If you've forgotten your password, reset your password. -
Hit Apply.
-
Hit Reboot and wait for your modem to reboot, then you're good to go.
Can't get online? Call us on 1300 997 271 and we'll help you.